Via Lattea
- Level:
-
Difficult
- Makes:
-
42 servings
Coating
Used products: Coating
Preparation: Coating
Melt at 50°C and temper at 31°C to make the shells. Pipe a quantity of chocolate sufficient to cover the whole mould. Vibrate the mould well to remove any air bubble trapped in the chocolate and then void the chocolate in excess to obtain a thin shell. Repeat the same procedure again. Place the moulds at 15°C and leave them to set.
Calamondin gelatin
Used products: Calamondin gelatin
-
250 gcalamondin
-
35 gsugar
-
6 gpectin
-
325 gsugar
-
18 gglucose DE 43
-
3 gcitric acid solution
Preparation: Calamondin gelatin
In a pan, poach the sugar with the pectin; add the calamondins pulp and all the ingredients, except the citric acid. Bake at 70 brix, remove from the fire and add the citric acid. Pour the gelatine on a silpat and leave it to cool down. Mix it well with a scraper and pipe it on the chocolate shells previously prepared.
Earl Grey filling
Used products: Earl Grey filling
-
210 gmilk
-
30 gBergamot Earl Grey tea
-
5 gdextrose
-
50 gcocoa mass
-
15 gglucose DE 43
-
25 gbutter
Preparation: Earl Grey filling
Boil the milk to 85°C and make an infusion with the earl grey tea for 5 minutes, then filter it. Pour it in a small jug, add the sugars, the chocolate couverture, the cocoa mass and the cocoa butter. Mix it well for about 3 minutes to obtain a shining texture. When the mixture reach a temperature of 29/30°C, pour it on the calamandin gelatine.
Orange crunch
Used products: Orange crunch
-
250 gcane sugar
-
6 gorange zest infusion (24h brewing)
-
3 ggrated ginger
Preparation: Orange crunch
Mix the sugar and the fresh orange zest with the ginger. Mix it carefully. Cover it and leave it to brew of at least 24 h. Add 40 g of pistachio cremino.
Pistachio Cremino
Used products: Pistachio Cremino
-
110 gPistachio paste
Preparation: Pistachio Cremino
Bring the ingredients to 30°C and mix well. Add the orange and ginger crunch and mix well. Temper it at 26° on the marble table and pipe it into the shell. Fill the shell completely.
Assembly
Used products: Assembly
Preparation: Assembly
After having piped the three different textures in the shell, cool them down. Fill a piping bag with the Guayaquyl 64% chocolate and lay down some soft acetate sheets of the same size of the moulds to close them. Close the moulds and put them back in the fridge for 10 minutes. Remove the bonbons from the mould and place them on a Plexiglas board. Decorate them.
Comments